Features

• 24V class 2 control circuit with 40VA transformer to protect against short circuit
• External radio control terminal strip
• Low friction powder metal limit cam nuts with fully adjustable rotary type limit switch assembly
• Three button open-close-stop control station Nema-1
• Continuous duty industrial motor with overload protection
• Motor removable without affecting limit settings
• Heavy duty 5LV-belt
• #41 roller chain and sprockets on all internal drives
• Adjustable friction clutch
• Solenoid Brake standard
• #50 roller chain and sprockets on final drive
• 3/4" permanently lubricated and sealed ball bearings on pulley shaft
• Second and final stage of reduction cast iron 1" flanged bearings permanently sealed and lubricated
• Emergency chain hoist with electrical cut-out switch for manual operation
• Chain keeper
• Left or right hand mounting
• Baked on dark grey coat finish
• Shipping weight: 110 lbs

Circuit options

1 (M)

• Heavy duty reversing contactor with mechanical and electrical interlock incorporating the UL325(2010)interface module.
• C2 factory wiring standard(constant pressure close),B2 wiring can be field set by moving 1 jumper and installing Micanan monitored fail safe photo-eyes (supplied) or (optional) Micanan compatible monitored fail safe electric edge

2

• Full fonction Smart 10.0 Logic conrol board featuring on-board receiver with antenna, enhanced program selection to include B2,C2, D1, E2, T & TS and supplied with Micanan monitored fail safe photo-cells or (optional) Micanan monitored fail safe electric edge
• D1 factory pre-set mode of operation standard (constant pressure open and close)

3

• Heavy duty reversing contactor with mechanical and electrical interlock. (Not available in US or other areas where UL325 (2010) is mandated)
• C2 factory wiring standard, B2 wiring can be field set by moving 1 jumper. Provisions for standard reversing devices.