The Ultimate Guide to Fixing a Dented Garage Door
Figuring out how to fix a dented garage door can be quite challenging, especially if you try to do it on your own without professional assistance.
Your dented garage door can affect your home’s curb appeal. A damaged door might not seem like a big issue, but if you plan to sell your house in the future, it could be.
So grab your tools, because it’s time to tackle that dent in your garage door, which can either make or break a first impression.
How to Fix a Dented Garage Door – Tools You May Need
- Wooden block
- Rubber mallet
- Fine-grit sandpaper
- Putty knife
- Auto-Body filler
- Garage door Paint
Determine the Extent of the Damage
While garage doors are generally sturdy, they are often bumped by vehicles, resulting in dents. Storm damage may also be responsible for a dent or two.
Before starting your repairs, you need to understand the extent of the damage. Your first step should always be to determine whether the door still opens.
If it does, you’re lucky! Repairs shouldn’t take too long.
If you have a significant dent in your garage door, you will probably need to have it replaced. However, minor dents in your home’s garage door can be fixed.
Methods for Fixing a Dented Garage Door
Have you noticed a dent on your wall and wondered how to fix it? Worry not, as we have two simple methods for you to try. Both methods are fast and easy, but you may need to try other options for stubborn dents. Here's what you'll need for each method and the steps to follow:
Method 1:
- Materials:
- Wooden block
- Rubber mallet
- Putty knife
- Fine-grit sandpaper
- Patching material
- Paint
- Primer
Steps:
- Clean the dented area with warm water and detergent and let it dry completely.
- Place a wooden block over the dent and gently tap it with a rubber mallet to even out the dent.
- Sand the area to smooth it out.
- Use a putty knife to apply patching material to the dented area and make it even. Let it dry and then sand it down again.
- Apply primer to the area and let it dry. Finally, paint the area to match the surrounding wall.
Method 2:
- Materials:
- Compressed air
- Heat source
- Aluminum foil
Steps:
- Clean the dented area with warm water and detergent and let it dry completely.
- Cover the dent with a strip of aluminum foil.
- Use a heat source to heat the foil for about a minute evenly.
- Remove the foil and spray the dent with compressed air upside down for about 30 seconds.
We hope these methods help you repair the dent in your wall. If not, other options are available, so don't give up!
How to Fix a Dented Garage Door ––What to Do When You Can’t Do-It-Yourself
If you can’t fix the dent on your garage door, there’s always an alternative—call the professionals. Automated Door Systems specializes in dent repairs, door replacements, and garage door system problems.
Replacing doors is inexpensive, so don’t lose hope when a DIY technique fails to fix the dent. For the best garage door replacement, contact us now.
Find the solution to your problems today. See why hundreds of homeowners trust us.