Garage door repairs are common as quite often do our garage doors break down. Some common garage door repairs required are listed below.
Broken Springs
The springs on your garage door are designed to open and close the door a set number of times. Eventually, they will break, and you will know it if you are at home. When a garage door spring breaks, it makes a loud noise, almost like a firework going off in your garage. At this point, attempting to open or close the door can be very dangerous. There can still be tension left in the spring, and it could knock the door off its tracks, as well as cause personal injuries if it snaps off. If the spring breaks on your garage door, do not try to open it. Instead, call and schedule garage door repair service immediately. You should also stay out of your garage until after the door has been fixed.
Broken Cables
Cables can break on their own from normal wear and tear or from the stresses placed on them when springs break. If a cable is broken, one side of the door may appear to be “sagging” compared to the other. That side of the door may also seem heavier. You may also notice the door is slightly angled and lower on one side as it opens. If all the cables are broken, the door may not stay in place when it is opened. Instead, it will fall down as soon as you lift it up, which can be a serious safety risk.
Sticking Rollers
The rollers on the sides of the door should spin and turn. If they are stuck and sliding, this can cause the door to come off its tracks. Stuck rollers can also make opening and closing the door noisier. If the door has come off its tracks in either the open or closed position, leave it in place. Attempting to close or open the door could result in the cables and springs also breaking. If the door is just being noisy, you need to have the rollers replaced and the tracks cleaned. Often, stuck rollers are due to insufficient lubrication and excess humidity.
Door Opens But Won’t Close
This problem is often related to the sensors. If the lenses get dirty, or there is something directly in front of them, they will prevent the door from closing. Clean the lenses and verify nothing is in the way of the sensors. If the door still won’t close, then it is time to call a garage door repair technician.
The Remote Opener Doesn’t Work
If the garage door opener remote is not working, see if you can open the door using the switch inside the garage. If the door opens, then it could indicate the batteries in the remote need to be replaced. After replacing the batteries, if the remote still doesn’t work, it may need to be resynched with the opener or replaced. If the door doesn’t open and you have power, verify the opener is plugged in and the breaker has not blown. Once verifying these things, if the door isn’t working, it could mean an electrical problem or that the opener needs to be replaced. As you can see, there can be all sorts of reasons for a broken garage door. If your garage door is not working correctly, please feel free to contact
The Automated Door Systems. Our technicians are skilled at new garage door installations, garage door repairs, spring replacement, installing and repairing garage door openers, and more. For more information, feel free to
contact us! 